| View previous topic :: View next topic |
| Author |
Message |
boopteedo
Just looking around
Joined: 22 May 2008
Posts: 2
Location: So California
|
 Posted: Thu May 22, 2008 7:25 pm Post subject: Recording channel getting bumped? |
 |
|
So I have been a long time ReplayTV user... older 2xxx model, rigged into my tv and DISH.
All worked fine until about 2-3 months ago, maybe about the time the stock changed hands?
Since then, I have recordings scheduled. The basic network recordings record just fine. But anything on DISH initially goes to the requested channel, then 1-2 secs bumps to channel 84 HSN (Home Shopping Network.)
I have never paid for a subscription so I wondered if I am now required to have a paid subscription to use the unit beyond netowrk channels.
Anyone else have this problem? The DISH works just fine, if i am watching through the sat/tv only no problem, but I cannot record. 
Any thoughts or help appreciated. I dread trying to connect with a real person at ReplayTV support...
[color=darkred]Boop[/color] |
|
| Back to top |
|
 |
rm -rf *.*
Replay junkie
Joined: 01 Jun 2004
Posts: 210
Location: Uberglitch, Switzerland
|
| Posted: Fri May 23, 2008 7:48 am Post subject: Re: Recording channel getting bumped? |
|
|
| boopteedo wrote: | I have never paid for a subscription so I wondered if I am now required to have a paid subscription to use the unit beyond netowrk channels.
|
Nope. RTV-2k's & 3k's were designed before the concept of subscriptions were added to the businuess model. Effectively, they all have "Lifetime Subscriptions".
| boopteedo wrote: |
Since then, I have recordings scheduled. The basic network recordings record just fine. But anything on DISH initially goes to the requested channel, then 1-2 secs bumps to channel 84 HSN (Home Shopping Network.)
|
What happens when you use the RTV to manually tune to one of the DISH channels as if you were going to watch it "live"? Does it stay on the channel or does also it bounce to 84?
Regardless, I would also check your Dish reciever IR settings in the RTV setup menu as your Dish controller might have recieved a firmware update that changed the IR codes slightly.
Have you verified that nothing has changed in one of the configuration menus on the dish reciever?
_________________
Still no news from New Zealand.
If we ever get any, we'll be sure to let you know. |
|
| Back to top |
|
|
hdonzis
Moderator
Joined: 05 Jan 2005
Posts: 7834
Location: San Antonio, TX
|
| Posted: Fri May 23, 2008 9:40 am Post subject: |
|
|
Oh, maybe the problem is that it needs an "enter" key after the channel change, so it is going back to 84 because that was the last channel being viewed? Does it always jump to channel 84 or is it the previous viewed channel?
Henry
_________________
Here's my Poop |
|
| Back to top |
|
|
boopteedo
Just looking around
Joined: 22 May 2008
Posts: 2
Location: So California
|
| Posted: Fri May 23, 2008 2:50 pm Post subject: Thanks all... |
|
|
I did a bit of troubleshooting and changed the IR blaster code. In doing so, I also discovered that the IR cable was not secured against the DISH receiver and Voila!
I can change channel without any bounce now, and will test against my recordings in the next few days. I am saddened that I missed the most recent episode of Wire in the Blood.
Thanks all,
Boop
ps I do NOT watch Home Shopping Network, for the record!  |
|
| Back to top |
|
|
|
FAQ
Search
Memberlist
Usergroups
Register
Profile
Log in to check your private messages
Log in
